A wireless charging version of Huawei's Watch GT2 Pro is now available

A retrospective look at the Watch GT2

Although the Watch GT 2 was presented to the general public in September of the year prior, it already has a successor. This is technically the second upgrade, given that a model of the GT2 e was released in the spring before this one. In addition to having a more athletic look, that one was equipped with a feature that measured the amount of oxygen that was present in the blood. The remaining requirements have, for the most part, maintained their previous state.

The manufacturer then released an updated version of the firmware, bringing the SpO2 up to the GT 2 level. Obviously, the sensor had been positioned in the correct area; all that was left to do was activate it.

The Watch is jam-packed with a wide range of different functions and features. This contains a heart rate sensor and an integrated GPS receiver in addition to the jaw-dropping display that is composed of curved 3D glass and AMOLED. It can withstand water resistance of up to 5 ATM.

In addition to keeping track of all core fitness statistics, it can monitor a wide variety of other sporting activities. The gadget also analyzes the user’s respiration. At the same time, they are asleep, check for atrial fibrillation, and aid users in coping with stress by providing feedback on their heart rate variability. All of these functions are carried out while the user is wearing the device. Finally, there is some clever capability accessible, and it comes in the form of the ability to make calls from the gadget itself when it is tethered to a smartphone, as well as storage for music. Additionally, there is an option to play music from the device.

Keep an eye on GT 2 Pro

We were ready to launch the WATCH GT 2 Pro because the Economic Commission for Europe (ECE) has been testing and certifying it for the past few months. In addition to that, there were other holes scattered over the road.

Nevertheless, as of this morning, everything is official and established beyond a reasonable doubt. The FreeBuds Pro TWS earphones with Active Noise Cancellation and the Watch GT2 Pro were made available to the general public for the first time during the Huawei Developer Conference 2020.

The clock is circular, just like its predecessor, and its outside is crafted from Sapphire Glass. It also features a 1.39-inch OLED touchscreen with a resolution of 454 by 454 and an OLED display. Ceramic makes up the 46mm case’s rear, while lightweight titanium is used for the rest of the case’s construction. On the right side, where there were once two physical buttons, there are now two such buttons.

The new Watch comes equipped with a Kirin A1 processor, 32 megabytes of random access memory (RAM), 4 gigabytes of built-in storage space, built-in GPS, and compatibility with Bluetooth 5.1. Additionally, the Watch features 4 gigabytes of built-in storage space. This package includes standard sensors for monitoring fitness, such as a SpO2 monitor that measures blood oxygen levels. LiteOS, which Huawei developed, runs the show here.

The company has unveiled an innovative new function that it refers to as “route back.” Because it utilizes GPS, you can utilize this even if you do not have a phone because it will assist you in retracing your steps. The sensor for heart rate and the sensor for adverse weather have both been completely redesigned, with the heart rate sensor being upgraded to a model that provides more precise readings.

The 455-milliampere-hour battery will be our topic of discussion now. This capacity is sufficient to keep the Watch GT2 Pro operational for roughly two weeks or 30 hours with the GPS feature activated. The most exciting thing about it is that it is compatible with QI wireless charging, which is why it gets our top pick. Because of this, there is no chance that the sockets and cables will become worn out, and there is also no chance that they will become overheated. Additionally, this suggests that you can charge it with nearly any standard wireless charger that is now available on the market. A rapid top-off that only takes five minutes to complete is plenty for around ten additional hours of use.

Two separate versions of the appliance may be purchased: the basic model and the sports variant. You can choose between wearing bracelets made of leather or plastic with the Nebula Gray and Night Black color options that you have selected.

Specifications of the product and its availability

  • Dimensions: 46.7 x 46.7 x 11.4 mm, 52g
  • The display features a 1.39-inch Super AMOLED panel with a resolution of 454 by 454 pixels and a Sapphire Glass Kirin A1 processor. Other display specifications include these features.
  • Several different sensors, including an accelerometer, gyroscope, geomagnetic, ambient light, optical heart rate, air pressure, and temperature, are incorporated into the device. SpO2 5ATM affords increased resistance to the effects of water.
  • 32 megabytes of Random Access Memory (RAM), in addition to 4 gigabytes of Flash Memory.
  • GPS and Bluetooth v5.1 BLE are both available as choices for connectivity on this device.
  • In addition to supporting wireless charging, the device’s battery has a capacity of 455 mAh and is expected to last for two weeks under regular use. There is a thirty-hour runtime available for the GPS mode.
  • Construcción de titano, diseo elegante y de alta calidad, y caractersticas de calidad superior.
  • More than a hundred unique forms of exercise have been developed.
  • recharging with the use of wireless methods.
  • Speaker system that incorporates the most recent GPS technology.

It is predicted that the sports edition will have a price tag of 329 Euros when it becomes available by the end of this month. The Classic variant with a letter strap may be purchased for a total cost of 349 Euros.

Huawei is currently focusing on producing several different products, one of which is the Mate Smartwatch. It is predicted that this one, along with the Mate 40 series, will be released sometime during October.

Leave a Reply